Project Monitoring

Project Sampling
Runoff samples will be collected from 18 collection sites during artificial storms generated by a water truck applying 12,000 gallons of water on the site (1,000 gallons per test segment) over the course of about 7 passes.

This amount was chosen due to practical constraints which included applying enough water to provide for flow into the collection vaults without applying too much water that would flush all the pollutants off within the first couple of passes by the water truck.

This amount of water is equivalent to an 17-hour volume of a 10-year, 24-hour storm intensity. This is also equivalent to 12 hours of a 24-hour, 100-year storm intensity.

Sample Analysis
Samples will be analyzed by the City of Yakima Wastewater Treatment Laboratory for stormwater pollutants associated with urban locations including:
  • Total suspended solids (TSS)
  • Biological oxygen demand (BOD)
  • Total petroleum hydrocarbons (TPH)
  • Fecal coliform (FC)
  • Copper (Cu)
  • Lead (Pb)
  • Zinc (Zn)
Project Overview Diagram
Construction Sampling Tests
Dumping Water Onto Porous Concrete
Tanker truck making a water dump run. Samplers are standing by.
Tanker Truck Making a Water Dump Run and Samplers Are Standing by
Truck dumping water onto porous concrete. Note there are no puddles.
Porous Concrete and Permeable Pavers Immediately After Pass of the Tanker Truck
Porous concrete and permeable pavers immediately after pass of the tanker truck.
Sampling Vault
Sampling vault after testing.